Click for DisplayMate Home Page   The Standard of Excellence for Image and Picture Quality   Click to Order DisplayMate  
  DisplayMate Home PageEnd User ProductsProfessional ProductsSelection GuideOrdering InformationContact Us  
--------------------
Product Information
End User Products
Professional Products  
Complete Productline  

Ordering
Ordering Information
Volume Discounts
Upgrades
Order Online Click to Buy DisplayMate  

General Information
Intro to DisplayMate
Reviews + Awards
Best Video Hardware  

Display Information
DisplayMate on Twitter    
Evaluation Guides
Mobile Displays  
HDTV Displays

Special Information
Printer Calibration
Macs + Linux + Unix
Consulting Services  

Customer Information
Customer Support
Join Our Mailing List
Register Online
Software License
Contact Us

Company Information
About Us
Contact Us

Website
Site Map
Home Page
Legal Terms of Use


    Video Ergonomics    
Copyright © 1990-2011 by DisplayMate Technologies Corporation. All Rights Reserved.
This article, or any part thereof, may not be copied, reproduced, mirrored, distributed or incorporated
into any other work without the prior written permission of DisplayMate Technologies Corporation.

This article is specifically concerned with issues that fall under the province of ergonomics: a broad, interdisciplinary applied science concerned with optimizing the functionality of things people use, and the tasks they perform, so that the workplace is properly adapted to the worker. This not only increases user comfort, but it also increases user productivity as well, a double payback for your investment.

The Display   |   Setting Up   |   Minimize Stress   |   Eye Strain

The primary approach to maximizing user comfort and productivity with video displays is to continually optimize and improve your work environment, your work habits and methods, and your equipment. Not just when you setup a work area or room, or when you buy and install the hardware and software, but every day and for every task. All too often users accept a computer system as is, and are afraid to adjust it or change it to suit their needs. Other users are either too busy or just plain forget that their display and work area need continuing attention.

The Display

The most crucial element of Video Ergonomics is the video display itself. Obviously, if the display is not performing as it should then all of the other elements discussed here cannot be effective either.

  • The first step is to make sure that you match the display to the intended application. The most important factors include screen size, image brightness, sharpness, and cost.

  • Select the best video mode, screen pixels and color-depth (number of screen colors), for your application.

  • Carefully set up all of the display and video board controls for optimum image and picture quality using DisplayMate.

  • Regularly readjust the display controls when your application, room lighting, screen resolution or color-depth change during the day.

  • Clean the screen on a regular basis in order to keep the image as sharp and as bright as possible.

  • When the display no longer performs up to par, then either have it repaired or buy a new monitor.

Setting Up Your Work Station

In this section we will summarize some of the most important issues involved in setting up your work station. A detailed discussion of the general work station and work environment is beyond the scope of this article.

Screen Size:

The screen size should be appropriate for the expected viewing distance and the type of work. For most users, a 15" to 17" diagonal screen should be satisfactory. Larger screens are needed for graphics with multiple display windows. Excessively small or large screens will increase eye fatigue.

Lighting:

The lighting for a VDT work area should be modified to maximize contrast and minimize glare, while providing sufficient illumination for other activities. The display screens should be oriented perpendicular to windows and other sources of glare. Blinds should be used to control the amount of outside light entering the room through windows. The optimum lighting level for VDT work is generally about 200 to 500 lux, less than half of the standard office lighting levels of 750 to 1500 lux. Use indirect lighting where possible. Overhead lights should be recessed and baffled to reduce the possibility of their entering into a user's field of view, or causing glare. Uniformly balanced light levels are important in order to reduce eye fatigue that results from continual iris adaptation. If local task lighting is necessary, a dimmer should be available to adjust the light level.

Work Area:

It is important to have an adequately sized work area, and a work table that is large enough for all necessary equipment and materials. A functional layout is very important, with frequently used items within easy reach.

Adjustable Everything:

Just about everything needs to be adjustable in order to properly accommodate every user comfortably. Each user should frequently adjust his or her work station in order to find the optimum configuration.

  • To begin with, you need a comfortable chair that is adjustable in height and has an adjustable and reclining backrest. Casters and an armrest are important. Adjust the chair first: the user's feet should be flat on the floor; if they're not, then use a footrest.

  • The table height should be adjustable so that the keyboard is at a comfortable height. At the recommended height, your forearm should be nearly horizontal.

  • The screen should be adjustable in height, position, and orientation. Place the display so that it is close to the straight ahead position where you will be sitting. The top of the screen should be near eye level, so that you are looking slightly downward, with an angle of roughly 20° toward the center of the screen. The tilt of the screen should be adjusted to help minimize glare. Placing the display on top of the computer system unit, which is itself on top of your desk, as is often pictured in many advertisements, is seldom an optimum position for a display.

  • If you need a document holder for data entry, get one that is adjustable in height, position, and orientation. Set it up next to the display screen, at a comparable height and distance, so that you can easily switch your eyes between the document and the screen. This will minimize eye accommodation fatigue due to a change in focal distance.

Minimize Stress

Many people don't realize that VDT work can create a good deal of job stress:

  • Physical stress and musculoskeletal strain arise from poor posture, poor quality chairs, poorly designed work areas, as well as the static and sedentary nature of VDT work. Change your seating position frequently and get up and stretch regularly.

  • Psychological stress is the result of worker unhappiness. Many studies have found that VDT complaints correlate with general job dissatisfaction.

  • General stress can arise from many factors including a high work load, machine pacing, and electronic monitoring of workers. This can be minimized by good job design, introducing flexibility into the work pace and schedule, and frequent rests in order to break the intensity of the VDT session.

Minimizing Eye Strain

In order to successfully minimize user eyestrain it is necessary to deal with a wide variety of problems, any of which may cause user eye discomfort. Below, we bring together and summarize a number of issues that are discussed throughout the DisplayMate Manual:

  • Maintain a good general work environment.

  • Proper lighting conditions are essential. Pay particular attention to glare.

  • Optimally position the display in your work area so that you can face it without any unnecessary twisting and turning. Regularly adjust its location and orientation to suit your own varying work needs.

  • Have a good quality display and maintain it in a state of good adjustment. Clean the screen regularly.

  • Regularly setup and adjust the display's controls to suit your own varying needs, in accordance with the room lighting and the software's screen appearance.

  • Use computer software that has been ergonomically designed for user comfort and productivity. This includes things like good screen layout and a logical and clear presentation of information and requests for input.

  • Regularly rest your eyes and take periodic work breaks away from your work area. To rest your eyes, close them for a while, look far away to change the focal distance, and exercise the eye muscles by looking all around.

  • Have regular eye exams with an ophthalmologist or optometrist. A significant fraction of the population has improperly corrected vision, so before beginning regular VDT work have an initial eye exam, and tell the doctor that you will be working with a VDT. If you wear glasses, make sure that the prescription is up to date. Also consider getting a special pair of reading glasses with a prescription optimized for the distances involved in video display work, typically 20" to 26", which is about 8" further away than the distances used for reading books and other printed material. This becomes increasingly important after age 40.

Copyright © 1990-2011 by DisplayMate Technologies Corporation. All Rights Reserved.
This article, or any part thereof, may not be copied, reproduced, mirrored, distributed or incorporated
into any other work without the prior written permission of DisplayMate Technologies Corporation.

Next Top 10 Video Tip Article
                                                                                                                                                                                                                                                                                                                   

--------------------
Copyright © 1990-2014 by DisplayMate® Technologies Corporation. All Rights Reserved.
Click here for Copyright, Trademark, Warranty Information and Legal Terms of Use

Screen Resolution: This site best viewed at a resolution format of 1280x1024 pixels or greater.
Printing: If your browser is improperly printing some pages with text cutoff on the right edge then print in
Landscape mode or reduce the font size (View Menu - Text Size) and margins (File Menu - Page Setup).